Key Advantages
-
Enhances the natural shade – subtly deepens the colour of the surface.
-
Controlled satin finish – without creating a strong gloss.
-
Protection against stains and dirt – including oils, grease and drinks.
-
High penetration into the substrate – without forming an external coating layer.
-
Resistant to UV radiation and weathering – suitable for indoors and outdoors.
-
Easier maintenance – helps prevent dirt from penetrating the surface.
-
Water-based – not classified as hazardous for transport, according to the manufacturer.
Applications
The product is intended for surfaces with medium to high absorbency and a natural or textured finish, such as:
-
Natural stone, including aged stone.
-
Paving stones and interlocking stone surfaces.
-
Ceramic surfaces with a textured finish and suitable absorbency.
-
Dressed surfaces or surfaces with a rough finish.
-
Wall and floor coverings, indoors and outdoors.
Important: the product is not suitable for smooth, glossy or polished surfaces.
Technical Specifications – Litokol X-Tone Satin
| Property | Manufacturer’s data |
|---|---|
| Product colour | White |
| Acidity level (pH) | 8–9 |
| Specific gravity | 1.00 kg/L |
| Coverage | 10–15 m² per L |
| Working time | 5–10 minutes |
| Application temperature | 5°C to 35°C |
| Waiting time between coats | at least 2–3 hours |
| Waiting time before foot traffic | 4–6 hours after the final coat |
| Pack size | 1 L |
| Shelf life | 24 months in the original packaging under suitable storage conditions |
Preparation and Application Instructions
Shake the bottle well before use. On a completely clean, dry surface, apply a thin, even coat of X-Tone Satin, without dilution, using a brush, roller or sponge. Spread the material evenly and avoid leaving excess product on the surface.
If needed, an additional coat can be applied after waiting at least 2–3 hours. Wait 4–6 hours after the final coat before walking on the surface again.
Before application, it is recommended to carry out a test on a small area to confirm suitability for the substrate and the desired shade. On new surfaces, wait for the adhesive and grout to cure fully.
Technical Datasheet File
X-Tone Satin technical datasheet
