Key Advantages
-
Deepens the natural tone – highlights and enhances the colour of the surface.
-
Matt finish – preserves a natural look without sheen.
-
Uniform joint colour – suitable for renewing the shade of cementitious and epoxy grout.
-
Stain protection – helps prevent the penetration of oils, grease and dirt.
-
High penetration into the substrate – without forming a coating layer on the surface.
-
Resistant to UV radiation and weather – suitable for indoors and outdoors.
-
Easier maintenance – makes routine cleaning easier.
Applications
-
Natural stone, including aged stone.
-
Terracotta and concrete surfaces.
-
Pebbles and stone surfaces.
-
Ceramic and engineered stone surfaces, including quartz and marble aggregates.
-
Renewing and evening out the shade of cementitious and epoxy grout joints.
-
Wall and floor coverings indoors and outdoors.
The product is suitable for substrates with medium to high absorption, and also for certain smooth, dense surfaces, in accordance with the manufacturer’s dilution and application instructions.
Technical Specifications – X-Tone Matt
| Property | Manufacturer’s value |
|---|---|
| Material colour | White |
| Acidity (pH) | 6.5–7.5 |
| Specific gravity | 0.99 kg per litre |
| Coverage | 15–20 m² per litre |
| Working time | 5–10 minutes |
| Application temperature | 5°C to 35°C |
| Waiting time between coats | 2–3 hours |
| Waiting time before foot traffic | At least 4 hours |
| Pack size | 1 L |
| Shelf life | 24 months in original packaging under suitable storage conditions |
Preparation and Application Instructions
Shake the bottle well before use and make sure the surface is clean, completely dry and not too hot.
On absorbent surfaces: apply a thin, even coat of the material without dilution, using a brush, roller or suitable pad. If necessary, a further coat can be applied after 2–3 hours.
On surfaces with low absorption: dilute the material with water at a ratio of 1:1 or 1:2. After application, wait approx. 5 minutes and remove excess material with a white pad or an absorbent cloth.
Wait at least 4 hours after finishing the application and removing the excess before walking on the surface again.
Before application, it is recommended to carry out a suitability test on a small area. On new surfaces, wait for the adhesive and grout to cure fully.
Technical Data Sheet
X-Tone Matt Technical Data Sheet
