Key Advantages
-
Water repellency and moisture protection – through pores, joints and cracks up to 1 mm.
-
Deep penetration into the substrate – creating a protective barrier against water and salts.
-
Maintains water vapour transmission – allows the substrate to keep breathing.
-
Protection against salt efflorescence and mould – helps reduce moisture damage.
-
No change to the surface shade – preserves the original appearance.
-
Resistant to UV radiation and weather – suitable for interior and exterior use.
-
Water-based – contains tailored silane polymers for improved flexibility and adhesion.
Applications
-
Balconies and tiled surfaces exposed to rain.
-
Shower areas and wet rooms.
-
Ceramic and porcelain stoneware flooring and wall tiling.
-
Clinker and terracotta tiles.
-
Marble, granite and natural stone.
-
Concrete surfaces.
-
Cementitious grout joints.
The product is particularly suitable for treating water penetration problems in exterior tiling exposed to rain and freezing.
Technical Specifications – X-Scud Terrazze
| Property | Manufacturer data |
|---|---|
| Material colour | Transparent, colourless |
| pH level | 10.5–11.5 |
| Specific gravity | 1.05 kg per litre |
| Coverage | 10–15 m² per litre |
| Working time | 5 minutes |
| Application temperature | 5°C to 35°C |
| Waiting time between coats | 1–2 hours |
| Waiting time before foot traffic | 4–6 hours |
| VOC content | Less than 0.05% |
| Flammability | Non-flammable |
| Pack volume | 1 L |
| Shelf life | 24 months in original packaging under suitable storage conditions |
Preparation and Application Instructions
Shake the bottle well before use and make sure the surface is completely clean and dry. Pre-cleaning the surface with the X-Cleaner Scrub cleaner is recommended.
Apply X-Scud Terrazze undiluted, in a thin, even coat using a brush, roller or suitable pad. Make sure the joints and cracks are fully saturated.
After approx. 5–10 minutes, spread out and remove excess material using a clean cotton cloth or a white pad. If needed, a second coat can be applied after 1–2 hours, especially on absorbent substrates such as concrete, terracotta and sandstone.
Foot traffic can resume after approx. 4–6 hours. Do not apply to a surface that is wet or too hot, or in direct sunlight. Before application, test a small area and make sure any new adhesives and grout have fully cured.
