Key Advantages
-
Improved slip resistance – increases surface friction, especially in wet conditions.
-
No coating layer – works on the existing texture of the tile.
-
Long-lasting effect – provides an anti-slip treatment over time.
-
No special periodic maintenance – no periodic renewal of the material is required, according to the manufacturer.
-
Suitable for existing floors – without replacing the tiles.
-
For indoor and outdoor use – suitable for a wide range of surfaces.
-
Water-based – non-flammable according to the manufacturer’s data.
Applications
-
Ceramic and porcelain tile flooring.
-
Granite and suitable stone surfaces.
-
Clinker tiles.
-
Engineered quartz surfaces.
-
Ceramic mosaic.
-
Indoor and outdoor floors where improved slip resistance is required.
The product is intended for materials with a silicate composition, so check suitability for the type of stone or tile before application.
Technical Specifications – X-Grip
| Property | Manufacturer’s data |
|---|---|
| Product colour | Amber |
| Acidity level (pH) | 1.0–2.0 |
| Specific gravity | 1.04 kg/L |
| Coverage | 15–20 m² per L |
| Typical contact time | 15–60 minutes, depending on the substrate |
| Application temperature | 5°C to 35°C |
| Flammability | Non-flammable |
| Shelf life | 24 months in the original packaging under suitable storage conditions |
Preparation and Application Instructions
Shake the bottle well before use and make sure the surface is completely clean and dry.
Before application, a test on a small, hidden area is essential, in order to determine the appropriate contact time between the product and the surface and to ensure improved slip resistance without an unwanted change in the appearance of the tile.
Apply X-Grip without dilution, in sufficient quantity and evenly, using a brush, roller, suitable sprayer or pad. During the contact time, keep the surface continuously and evenly wet with the product.
Recommended contact times by substrate type:
| Substrate type | Indicative contact time |
|---|---|
| Ceramic and porcelain tiles | 10–40 minutes |
| Clinker and engineered quartz | 30–60 minutes |
| Granite | 60–90 minutes |
After the contact time determined in the preliminary test, remove excess product and rinse thoroughly with water. Check the effectiveness of the treatment while the surface is wet.
Important: the product is highly acidic (pH of 1–2). Protect metal profiles, taps, seals and sensitive surfaces. Do not combine with other chemicals and do not apply in direct sunlight or on a surface that is wet or too hot.
