Key Advantages
-
Removes cement and cementitious grout residue – suitable for cleaning after tiling and cladding work.
-
Removes limescale and efflorescence – helps clean mineral deposits off the surface.
-
Removes rust and lime residues – for thorough cleaning of dirt originating from building work.
-
Preserves the grout colour – does not alter the colour of traditional cementitious grout when used correctly.
-
Concentrated material – can be diluted according to the surface type and the level of dirt.
-
Suitable for indoors and outdoors – for cleaning floors and walls.
-
Water-based – non-flammable according to the manufacturer’s data.
Applications
-
Cleaning cement residue after tiling and cladding.
-
Removing cementitious grout residue from tiles.
-
Cleaning limescale, efflorescence and lime deposits.
-
Removing rust stains and limewash residues.
-
Cleaning ceramic, porcelain tiles and glass mosaic.
-
Cleaning terracotta and aged or brushed marble, subject to appropriate dilution.
-
Cleaning floors and walls indoors and outdoors.
Important: do not use the product on polished marble or on other polished calcareous materials, which may lose their shine on contact with the acidic material.
Technical Specifications – X-Cleaner Forte
| Property | Manufacturer’s value |
|---|---|
| Material colour | Light blue |
| Acidity (pH) | 2.1–2.9 |
| Specific gravity | 1.04 kg per litre |
| Coverage | 10–20 m² per litre |
| Contact time | 5–10 minutes |
| Application temperature | 5°C to 35°C |
| Flammability | Non-flammable |
| Pack sizes | 1 L / 5 L |
| Shelf life | 36 months in original packaging, protected from heat, direct light and freezing |
Preparation and Application Instructions
Shake the bottle well before use. In most cases, the material should be diluted with cold water according to the surface type and the level of dirt.
| Application type | Product-to-water dilution ratio |
|---|---|
| General cleaning and deposit removal | Between 1:1 and 1:10 |
| Brushed marble | 1:10 |
| Tumbled Marble | 1:3 |
Spread the solution evenly over the surface and wait approx. 5–10 minutes. Then scrub with a white pad and remove the residues of material and dirt with a cloth, a rubber squeegee or a wet vacuum.
Finally, rinse thoroughly with clean water and dry with a clean cloth.
Important guidelines: on floors that have been grouted, wait at least 7 days before cleaning. Protect metal profiles, taps, seals and sensitive surfaces, use suitable protective equipment and carry out a suitability test on a small area before application.
What Is the Difference Between X-Cleaner and X-Cleaner Forte?
| Property | X-Cleaner | X-Cleaner Forte |
|---|---|---|
| Purpose | Acid cleaning after tiling work | Professional acid cleaning after tiling work |
| pH | 2.1–2.9 | 2.1–2.9 |
| Dilution ratio | 1:1 to 1:2 | 1:1 to 1:10 |
| Coverage | 10–15 m² per litre | 10–20 m² per litre |
| Waiting time after grouting | At least 5 days | At least 7 days |
| Pack sizes | 1 and 5 L | 1 and 5 L |
Both products are designed to remove mineral deposits and building residues. The main documented differences are in the dilution ratios, the coverage and the waiting guidelines after grouting. The specifications contain no comparative data proving that Forte is stronger in terms of cleaning effectiveness.
