Key Advantages
-
50 shades to choose from – deep, uniform shades to match flooring and wall tiling.
-
Water-repellent – exceptionally low water absorption.
-
High abrasion resistance – suitable even for high-traffic areas.
-
Resistant to common acidic substances – for convenient cleaning and maintenance.
-
Natural resistance to bacteria and mould – tested in accordance with ISO 846:2019.
-
Improved flexibility – to cope with temperature changes and varying service conditions.
-
High colour stability – also tested for exterior use.
-
For interior and exterior use – including swimming pools and underfloor heating systems.
Applications
-
Filling joints between ceramic and porcelain stoneware tiles.
-
Grouting glass mosaic and ceramic mosaic.
-
Filling joints in marble and natural stone.
-
Flooring and wall tiling in bathrooms and showers.
-
Balconies, courtyards and outdoor areas.
-
Swimming pools, fountains and water reservoirs.
-
Flooring over underfloor heating systems.
-
Floors and walls in residential, commercial and industrial buildings.
Important: The grout is intended for joints 0-20 mm wide according to the manufacturer’s data. It is not intended for flexible expansion joints or for locations requiring dedicated chemical resistance or complete watertightness.
Technical Specifications
| Property | Manufacturer data |
|---|---|
| Joint width | 0–20 mm |
| Mixing ratio – 3 kg bag | Approx. 0.7–0.8 L of water |
| Mixing ratio – 20 kg bag | Approx. 4.5 L of water |
| Working time after mixing | At least 45 minutes at 23°C |
| Application temperature | +5°C to +35°C |
| Time until foot traffic | Approx. 3 hours |
| Time until normal use | Approx. 24 hours |
| Time until use in swimming pools | Approx. 3 days |
| Service temperature after curing | −40°C to +90°C |
| Compressive strength after 28 days | At least 30 N/mm² |
| Flexural strength after 28 days | At least 5 N/mm² |
| Abrasion resistance | Up to 1,000 mm³ |
| Water absorption after 30 minutes | Up to 1 g |
| Water absorption after 240 minutes | Up to 1 g |
| Shelf life – 3 kg bag | Approx. 24 months |
| Shelf life – 20 kg bag | Approx. 12 months |
Preparation and Application Instructions
1. Substrate Preparation
Make sure the tiles are firmly bonded and that the adhesive or bedding has dried in accordance with the manufacturer’s instructions. The joints must be dry, free of dust and adhesive residues, and of a uniform depth of at least two thirds of the tile thickness.
2. Preparing the Mix
Pour about three quarters of the required amount of water into a clean container, gradually add the grout powder and mix with a mixer at low speed, approx. 400 rpm.
Add the remaining water gradually until a smooth, uniform, lump-free mixture is obtained. Keep the water ratio consistent between batches to prevent shade differences.
3. Applying the Grout
Fill the joints using a rigid rubber float, working diagonally across the joints, making sure they are filled completely and evenly.
Immediately remove excess material from the surface of the tiles.
4. Cleaning After Application
Begin cleaning when the grout is touch-dry within the joint. Use a large damp sponge and clean water, clean with circular movements and finish with diagonal wiping, without pulling material out of the joints.
5. Protection After Application
Protect the grout from direct rain and direct sunlight for at least 12 hours. Using material from the same production batch throughout the job is recommended for maximum shade consistency.
Coverage – Common Examples
Grout consumption depends on the tile dimensions, the tile thickness and the joint width. Below are examples from the manufacturer’s table:
| Tile size | Tile thickness | 2 mm joint | 3 mm joint |
|---|---|---|---|
| 20×20 cm | 8 mm | 304 g/m² | 456 g/m² |
| 30×30 cm | 10 mm | 253 g/m² | 380 g/m² |
| 30×60 cm | 10 mm | 190 g/m² | 285 g/m² |
| 60×60 cm | 10 mm | 126 g/m² | 190 g/m² |
| 60×120 cm | 5 mm | 47 g/m² | 71 g/m² |
| 120×120 cm | 5 mm | 31 g/m² | 47 g/m² |
Standards and Certifications
The product meets classification CG2 WA per ISO 13007-3, indicating an improved cementitious grout with high abrasion resistance and reduced water absorption.
In addition, the manufacturer’s specifications list GEV-Emicode EC1 Plus certification, an EPD environmental declaration, an A+ emissions rating and tests for resistance to bacteria and mould per ISO 846:2019.
