Key Advantages
-
Ultra-thin layer – renews the look without a thick coating.
-
Matt finish – gives the surface a uniform, refined appearance.
-
High abrasion resistance – suitable for the coating systems defined by the manufacturer.
-
Easy to clean – resistant to cleaning and disinfecting agents.
-
Scrub-resistant – even in dark shades.
-
A formula that reduces runs during application.
-
A choice of 150 shades from the Color Collection.
Applications
-
Renovating and changing the shade of ceramic coverings.
-
Coating and restyling furniture and decorative elements.
-
Renovating wood surfaces in the appropriate systems.
-
Colour coat in the Microresina Floor system for floors.
-
Colour coat in the Microresina Parquet system for parquet.
-
Use in Kerakoll Wallpaper systems.
Important: application on floors and parquet is carried out as part of the manufacturer’s layered system, and not necessarily with Microresina alone.
Technical Specifications
| Property | Manufacturer’s value |
|---|---|
| Composition | Two-component water-based coloured micro-resin |
| Finish | Matt |
| Number of shades | 150 |
| Mixing ratio A:B | 5:1 by weight |
| Working time after mixing | Up to 90 minutes |
| Average consumption | Approx. 0.10–0.15 kg per m² per coat |
| Touch-dry time | About an hour |
| Application temperature | 15°C to 30°C |
| Time before washing and regular contact with water | Approx. 48 hours |
| Shelf life | Approx. 12 months |
Packs: a 1.2 kg kit (1 kg component A and 0.2 kg component B), or a 3 kg kit (2.5 kg component A and 0.5 kg component B).
Standards and Approvals
The manufacturer declares conformity with EN 71-3 regarding heavy metals, and with HACCP requirements for use in finishing systems in food-related environments. An EPD environmental declaration is also available for the product.
Preparation and Application Instructions
Stir component A and gradually add component B at a ratio of 5:1, until a uniform mixture is obtained. After preparing the substrate according to the surface type, apply the material with a short-pile roller, brush or spray, in thin, even coats.
On non-absorbent substrates, the first coat can be applied without dilution; on absorbent substrates, dilute according to the manufacturer’s instructions. Subsequent coats can be diluted with clean water at a rate of 5%–10%, depending on the system and the application conditions. Allow drying between coats and apply an additional protective coat where the system requires it.
