Epoxy Resin Residue Cleaner – Kerakoll Fuga-Shock
Product Description
Fuga-Shock by Italy’s Kerakoll is a professional, ready-to-use cleaner designed to remove residues, stains and marks of epoxy resins from wall and floor coverings. The material helps clean residues left after epoxy grouting work and achieve a clean, uniform surface.
Key Advantages
-
Ready to use – no dilution required.
-
Designed for epoxy residues – helps remove marks and residues of epoxy resins.
-
Water-based – according to the manufacturer’s declaration on the packaging.
-
Low VOC emission – as stated on the label.
-
GreenBuilding Rating 2 – environmental rating shown on the packaging.
Technical Specifications
| Property | Manufacturer’s value |
|---|---|
| Pack size | 1 L |
| Appearance | Clear liquid |
| Acidity (pH) | Approx. 1.4 |
| Dilution ratio for general cleaning | 1:1 to 1:3 with water |
| Coverage at 1:1 dilution | Approx. 20 m² per litre of product |
| Coverage at 1:3 dilution | Approx. 40 m² per litre of product |
| Contact time before rinsing | Approx. 3–5 minutes |
| Application temperature | 5°C to 35°C |
| Shelf life | Approx. 24 months |
| Environmental rating | GreenBuilding Rating 2 |
Preparation and Application Instructions
Make sure the epoxy grout has fully cured, at least 7 days after application, and that the surface is free of dust. Shake the bottle before use.
For spot cleaning, the material can be used without dilution. For cleaning whole surfaces, dilute at a ratio of 1:1 to 1:3 in warm water. Apply with a white cleaning pad, wait approx. 3–5 minutes, scrub to remove the residues and rinse thoroughly with clean water. Do not leave the material on the surface for more than 5 minutes.
Important: the product is acidic and is not suitable for surfaces that are not acid-resistant. Carry out a preliminary test, protect sensitive surfaces and use gloves and protective goggles.
