Key Advantages
-
Removes hardened epoxy grout residue – effective even against old marks and residues.
-
Cleans stubborn stains – suitable for removing graffiti, spray paint and ink.
-
Removes silicone and polymer residues – for cleaning floor and wall surfaces.
-
Thick gel texture – allows a prolonged contact time and application on walls.
-
Suitable for delicate surfaces too – including polished marble and polished porcelain tiles.
-
Removes grease and wax – in addition to cleaning epoxy residue.
-
For indoor and outdoor use – suitable for floors and walls.
Applications
-
Removing residue of Starlike Pro, Starlike Crystal and Starlike Easy epoxy grouts.
-
Cleaning marks and epoxy films left after grouting.
-
Removing dark cementitious grout marks from polished porcelain tiles.
-
Removing graffiti, spray paint and ink.
-
Cleaning silicone residue and organic polymers.
-
Cleaning ceramic, glass mosaic and natural stone.
- Cleaning floors and walls, including vertical surfaces.
Technical Specifications – Starlike Care Pro
Property Manufacturer’s data Product type Thick gel Product colour White Acidity level (pH) 11.5–12.5 Specific gravity 1.12 kg/L Coverage 4–6 m² per L Contact time 10–30 minutes Application temperature 5°C to 35°C Flammability Non-flammable Pack size 0.5 L Shelf life 24 months in the original packaging, protected from heat, direct light and freezing Preparation and Application Instructions
Shake the bottle well before use.
To remove epoxy grout residue, wait for the grout to harden fully before cleaning — typically approx. 5 days at a temperature of 20–25°C, according to the manufacturer’s data.
Apply Starlike Care Pro without dilution, directly onto the area to be cleaned, and spread it evenly using a suitable pad or a white Starlike pad.
Wait approx. 10–30 minutes, depending on the amount of residue and how hardened it is. During the contact time, it is recommended to scrub the surface to help remove the dirt.
Then remove the cleaning solution with a damp sponge, rinse thoroughly with clean water and dry with a clean cloth. Do not let the rinse water evaporate on the surface, in order to prevent marks from reappearing.
If epoxy residue remains after cleaning, the process can be repeated.
Important guidelines: use suitable protective equipment, protect profiles, taps, seals and sensitive surfaces, and carry out a suitability test on a small area before use.
Technical Datasheet File
